Document Feedback - Brocade Communications Systems Gateway Administrator's Manual

3. World Wide Name (WWN)

Document feedback

Because quality is our first concern at Brocade, we have made every effort to ensure the accuracy
and completeness of this document. However, if you find an error or an omission, or you think that
a topic needs further development, we want to hear from you. Forward your feedback to:
Provide the title and version number and as much detail as possible about your issue, including the
topic heading and page number and your suggestions for improvement.
x
-
Brocade 4018—On the top of the blade
-
SilkWorm 3200, Brocade 200E, 3250 and 3850—On the bottom of the chassis
-
SilkWorm 3800 and Brocade 3900—Nonport side of the chassis
-
Brocade 5000, Brocade 4100, 4900, and 7500—On the switch ID pull-out tab located
inside the chassis on the port side on the left
-
Brocade 4016—Top of the switch module
-
Brocade 4024—Bottom of the switch module
-
SilkWorm 12000, Brocade 24000 and 48000—Inside the chassis next to the power supply
bays
-
SilkWorm Multiprotocol Router Model AP7420—On the bottom of the chassis and on the
back of the chassis.
-
SilkWorm 3800, Brocade 200E, 3014, 3016, 3250, 3850, 3900, 4012, 4018, 4020,
4024, 4100, 4900, 5000, and 7500 switches and Brocade 24000, and 48000 directors:
Provide the license ID. Use the licenseIdShow command to display the license ID.
-
SilkWorm Multiprotocol Router Model AP7420: Provide the switch WWN. Use the
switchShow command to display the switch WWN.
-
All other Brocade switches: Provide the switch WWN. Use the wwn command to display the
switch WWN.
documentation@brocade.com
Access Gateway Administrator's Guide
53-1000633-01