Canon Pixma MP460 Quick Start Manual page 28

(1) The document is scanned and saved to the computer.
(2) The document is scanned and stored as a PDF file.
(3) The document is scanned, and the image is attached to an e-mail using
the e-mail application software.
(4) The document is scanned and displayed on the registered application
software.
3
Use [ ] or [ ] to select the scan operation, then press [OK].
4
Press [Color] or [Black].
The document is scanned. The settings configured from MP Navigator apply when scanning.
IMPORTANT
• If with some types of original the position and size of the image is not scanned in correctly,
please refer to "Selecting the Behavior of the Operation Panel with MP Navigator" in the
Scanning Guide (On-screen Manual) and change the MP Navigator [Document Type] and
[Document Size] to match those of the original being scanned.
• The subsequent procedure varies depending on your settings. For details, see the Scanning Guide.
Scanning From An Application Software
You can scan an image from a TWAIN- or WIA- (Windows XP only) compliant
application software and use the image in that application software. This procedure varies
depending on the application software.
For the detailed procedure, refer to the manual of the application software you are using.
26
Scanning
(1)
(2)
(3)
(4)
Chapter 5