Troubleshooting - Boss AW-3 Dynamic Wah Owner's Manual

Troubleshooting

Power won't come on/
CHECK indicator doesn't light:
Is the specified adaptor (PSA-series;
sold separately) properly connected?
Check the connection once more (p. 10).
Is the battery low or dead?
Replace with a new battery (p. 18).
Is the guitar properly connected to
the GUITAR IN or BASS IN jack?
Check the connection once more (p. 10).
* To help preserve battery power while the AW-3
is being powered by battery, the power is actually
switched on only at the moment a cord is
plugged into the GUITAR IN or BASS IN jack.
* The battery that was supplied with the unit
is for temporary use---intended primarily for
testing its operation. For using the unit for
more extended periods of time, we
recommend the use of alkaline batteries.
* The CHECK indicator is designed for
providing information about effects—such
as their on/off status. It does not indicate
whether the power is on or off.
No sound / Low volume:
Is the AW-3 properly connected to
your instrument?
Check the connection once more (p. 10).
Is the volume turned down on any
guitar amp or effects device you have
connected?
Are you inputting to both the GUI-
TAR IN and BASS IN jacks?
The GUITAR IN jack is given priority. If
both jacks are used at the same time, the
signal that has been applied at BASS IN
will not be heard.
19