Advertisement
Installing Crutch and Cane Carrier
Assembly, Installation and Operating Instructions
Model Nos. 1305L
SAVE THESE INSTRUCTIONS
NOTE: Check ALL parts for shipping damage. In case of shipping damage, DO NOT use. Contact
Carrier/Dealer for further instructions.
Safety Summary
To ensure the safe and proper installation of the Crutch and Cane Carrier, these
instructions MUST be followed:
WARNING
DO NOT use this product or any available optional equipment without first
completely reading and understanding these instructions and any additional
instructional material such as owner's manuals, service manuals or instruction
sheets supplied with this product or optional equipment. If you are unable to
understand the warnings, cautions or instructions, contact a healthcare
professional, dealer or technical personnel before attempting to use this equipment
- otherwise, injury or damage may occur.
Check base weekly to ensure proper placement.
When loading the crutch/cane carrier, ensure items are securely placed into the
base. Also ensure that there is no interference with folding the wheelchair, the rear
wheels, or the flip back arms.
Strap must be securely fastened while carrying items.
NEVER insert or remove items while wheelchair is moving.
ACCESSORIES WARNING
Invacare products are specifically designed and manufactured for use in conjunction
with Invacare accessories. Accessories designed by other manufacturers have not
been tested by Invacare and are not recommended for use with Invacare products.
INSTALLATION WARNING
After ANY adjustments, repair or service and before use, make sure that all attach-
ing component parts are secure
For more information regarding Invacare products, parts, and services,
please visit www.invacare.com
1
Part No 1150745
Installing Crutch and Cane Carrier
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Invacare 1305L
Summary of Contents for Invacare 1305L
-
Page 1: Safety Summary
Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories. Accessories designed by other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products. INSTALLATION WARNING After ANY adjustments, repair or service and before use, make sure that all attach-... - Page 2 Installing Crutch and Cane Carrier NOTE: For this procedure, refer to FIGURE 1. 1. Slide the clamp with the base attached over the end of the step tube of the wheelchair. Ensure the base is towards the inside of the wheelchair. 2. Position the base parallel to the step tube. Base should be parallel to step tube to avoid bending spokes when folding the wheelchair. 3. Securely tighten the locknut that secures the base to the step tube of the wheelchair. 4. Remove the upper back upholstery screw and washer. 5. Align the strap with the back upholstery screw mounting hole. 6. Reinstall the back upholstery screw and washer and secure the strap to the wheelchair. 7. The base cleans easily with any chrome or glass cleaner. The strap can be cleaned with mild soap and water. FIGURE 1 Installing Crutch and Cane Carrier Installing Crutch and Cane Carrier CAUTION Strap...
-
Page 3: Limited Warranty
This warranty is extended only to the original purchaser who purchases this product when new and unused from Invacare or a dealer. This warranty is not extended to any other person or entity and is not transferable or assignable to any subsequent purchaser or owner. Coverage under this warranty will end upon any such subsequent sale or other transfer of title to any other person. - Page 4 44036-2125 L4Z 4G4 Canada 800-333-6900 800-668-5324 All rights reserved. Trademarks are identified by the symbols ™and ®. All trademarks are owned by or licensed to Invacare Corporation unless otherwise noted. ©2007 Invacare Corporation Part No 1150745 Rev A - 11/07...
Need help?
Do you have a question about the 1305L and is the answer not in the manual?
Questions and answers