Table of Contents
Advertisement
Table of Contents
Main Menu
To fasten the belt, insert the latch
plate into the buckle, then tug on the
belt to make sure the buckle is
latched.
To unlock the belt, push the red
PRESS button on the buckle.
Guide the belt across your body so
that it retracts completely. After
exiting the vehicle, be sure the belt
is out of the way and will not get
closed in the door.
All seat belts have an emergency
locking retractor. In normal driving,
the retractor lets you move freely in
your seat while it keeps some
tension on the belt. During a collision
or sudden stop, the retractor
automatically locks the belt to help
restrain your body.
Additional Information About Your Seat Belts
The seat belts in all seating positions
except the driver's have an additional
locking mechanism that must be
activated to secure a child seat. (See
pages
31
and
36
for instructions on
how to secure child seats with this
type of seat belt.)
If the shoulder part of the belt is
pulled all the way out, the locking
mechanism will activate. The belt
will retract, but it will not allow the
passenger to move freely.
To deactivate the locking
mechanism, unlatch the buckle and
let the seat belt fully retract. To
refasten the belt, pull it out only as
far as needed.
See page
15
for instructions on how
to wear the lap/shoulder belt
properly.
Driver and Passenger Safety
47
Advertisement
Chapters
Table of Contents
