Honda 2003 Pilot Owner's Manual page 324

2003 pilot
Hide thumbs Also See for 2003 Pilot:
Table of Contents

Advertisement

Main Menu
Table of Contents
Lights
Replacing Rear Bulbs
1.
Open the tailgate.
2.
Remove the two screws, then pull
the rear light assembly straight
back to remove it from the body.
3.
Determine which of the three
bulbs is burned out: stop/taillight,
turn signal/hazard lights, or side
marker light.
320
Maintenance
4.
Remove the socket by turning it
one-quarter turn counterclockwise.
5.
Remove the burned out bulb by
pulling it straight out of its socket.
6.
Install the new bulb into the
socket.
7.
Push the socket into the light
assembly and turn it clockwise
until it locks.
8.
Turn on the lights to make sure
the new bulb is working.
9.
Make sure all the wires are
correctly routed on the rear light
assembly, then install the
assembly on the body.

Advertisement

Table of Contents
loading

Table of Contents