Table of Contents
Advertisement
Main Menu
Table of Contents
Replacing a Rear License Plate
Bulb
1.
Remove the lens by carefully
prying on its left edge with a flat-
tip screwdriver.
2.
Remove the bulb by pulling it
straight out. Push a new bulb into
the socket.
3.
Reinstall the lens, left side first.
Replacing a Back-up light bulb
1.
Open the tailgate. Place a cloth on
the edge of back-up light cover.
Remove it by carefully prying in
the notch on its edge with a small
flat-tipped screwdriver.
2.
Remove the socket by turning it
one-quarter turn counterclockwise.
3.
Pull the bulb straight out of its
socket. Push a new bulb straight
into the socket until it bottoms.
4.
Insert the socket back into the
light assembly. Turn it clockwise
to lock it in place.
5.
Test the lights to make sure the
new bulb is working.
6.
Reinstall the back-up light cover.
Maintenance
Lights
CONTINUED
321
Advertisement
Chapters
Table of Contents
