Emm.sys Examples - Everex EV-159 Owner's Manual And Reference Manual

[pppp]
[port,page]
This parameter tells EMMSYS where to look
for a valid page frame. The page frame is the
first address of the EMS mapping window.
[pppp] valid values are C400, CBOO, CCOO,
nooo, ncoo
and EOOO (Hex). For most users,
C400 (default value if the [pppp] parameter is
not specified) is fine and this parameter is not
needed.
This parameter selects the port address of the
portion of the memory board configured for
expanded memory and the starting logical
page of expanded memory. For the port
option, the valid addresses are 208, 218, 258,
268, 2A8, 2B8, or 2E8 (Hex); the default value
is 258. When you define the port address 258,
it will look for this address first, but will also
look for port addresses 268, 2A8, 2B8 and 2E8
if port address 258 is not found. For the page
portion, the valid values are 00 to 7F (Hex).
5.1.3 EMM.syS Examples
1. device
=
emm.sys
This EMMSYS command line is fine for most users.
2. device
=
emm.sys C400
This EMMSYS command line looks for a starting page
43