Part Two: Amount Of Memory Banks Filled
Positions 1-3 of dipswitch SW2 set the number of banks of
RAM chips installed on the RAM 3000 Deluxe.
Although
there are no memory chips installed when the board leaves the
factory, the default setting is for
1
bank of memory chips
installed (SW2 positions 1-3 switched OFF).
Use the following table to configure SW2 to correspond with
the number of memory banks filled on the RAM 3000 Deluxe.
•
TABLE 3
RAM 3000 Deluxe Memory Banks Installed
(SW2 Positions 1-3)
SW2 Position
1
2
3
Banks Filled
•
1
2
3
4
5
6
Default Setting
NOTE: Avoid setting SW2 positions 1-3 to any other positions than
those listed in Table 3.
17