Remote Control - Yamaha RX-397 Owner's Manual

CONTROLS AND FUNCTIONS
®
STANDBY
Sets this unit to the standby mode.
@) SPEAKERS AlB
Turns on or off the set of speakers connected to the
SPEAKERS A and/or SPEAKERS B terminals on the rear
panel of this unit when the corresponding button is
pressed each time.
In the standby mode, this unit consumes a small amount of power
to receive infrared signals from the remote control.
®
POWER
Turns on this unit.
The Radio Data System features (FREQ/TEXT, PrY SEEK
MODE and PrY SEEK START) are only applicable to the
Europe model and are operational only when TUNER is selected
as the input source and the AMP/DEVICE switch is slid to the
AMP position.
(j) AMP/DEVICE switch
Switches the function of the control buttons numbered
®
between controlling this unit and controlling YAMAHA
CD players or YAMAHA cassette tape deck.
®
Radio Data System/CD player/Cassette tape
deck control buttons
Controls Radio Data System features, YAMAHA CD
players or YAMAHA cassette tape deck.
II
+
iL
I
VOLUME
I
I! - II
I
DISPLAY
I
~ DIR A DIR B REC
11kl<l1 @]
1~IIDlScl
l!REQITEXT MODE-PTY SEEK-START EON
AMP DEVICE CD TAPE
This section describes the function of each button on the
remote control used to control this unit or other
components made by YAMAHA. The functions of the
buttons used to control your other audio components are
the same as those of the corresponding buttons on those
components. Refer to those components' instruction
manuals for details.
@ VOLUME +/-
Increases or decreases the sound output level.
CD
Infrared signal transmitter
Sends infrared signals.
®
SLEEP
Sets the sleep timer.
@ Input selector buttons
Select the desired input source.
@ PRESET
A / V
Selects the preset station number (1 to 8) when TUNER is
selected as the input source.
• This does not affect the OUT (REC) level.
• When you press VOLUME +/- to control the sound output
level of this unit, VOLUME on the front panel rotates.
@ MUTE
Mutes the sound output. Press again to restore the sound
output to the previous volume level (see page 19).
@ CDfTAPE switch
Switches the function of the control buttons numbered
®
between controlling YAMAHA CD players and
controlling YAMAHA cassette tape deck when the AMP/
DEVICE switch is slid to the DEVICE position.
®
AlB/C/D/E
Selects the preset station group (A to E) when TUNER is
selected as the input source.
7
CONTROLS AND FUNCTIONS
®
STANDBY
Sets this unit to the standby mode.
@) SPEAKERS AlB
Turns on or off the set of speakers connected to the
SPEAKERS A and/or SPEAKERS B terminals on the rear
panel of this unit when the corresponding button is
pressed each time.
In the standby mode, this unit consumes a small amount of power
to receive infrared signals from the remote control.
®
POWER
Turns on this unit.
The Radio Data System features (FREQ/TEXT, PrY SEEK
MODE and PrY SEEK START) are only applicable to the
Europe model and are operational only when TUNER is selected
as the input source and the AMP/DEVICE switch is slid to the
AMP position.
(j) AMP/DEVICE switch
Switches the function of the control buttons numbered
®
between controlling this unit and controlling YAMAHA
CD players or YAMAHA cassette tape deck.
®
Radio Data System/CD player/Cassette tape
deck control buttons
Controls Radio Data System features, YAMAHA CD
players or YAMAHA cassette tape deck.
II
+
iL
I
VOLUME
I
I! - II
I
DISPLAY
I
~ DIR A DIR B REC
11kl<l1 @]
1~IIDlScl
l!REQITEXT MODE-PTY SEEK-START EON
AMP DEVICE CD TAPE
This section describes the function of each button on the
remote control used to control this unit or other
components made by YAMAHA. The functions of the
buttons used to control your other audio components are
the same as those of the corresponding buttons on those
components. Refer to those components' instruction
manuals for details.
@ VOLUME +/-
Increases or decreases the sound output level.
CD
Infrared signal transmitter
Sends infrared signals.
®
SLEEP
Sets the sleep timer.
@ Input selector buttons
Select the desired input source.
@ PRESET
A / V
Selects the preset station number (1 to 8) when TUNER is
selected as the input source.
• This does not affect the OUT (REC) level.
• When you press VOLUME +/- to control the sound output
level of this unit, VOLUME on the front panel rotates.
@ MUTE
Mutes the sound output. Press again to restore the sound
output to the previous volume level (see page 19).
@ CDfTAPE switch
Switches the function of the control buttons numbered
®
between controlling YAMAHA CD players and
controlling YAMAHA cassette tape deck when the AMP/
DEVICE switch is slid to the DEVICE position.
®
AlB/C/D/E
Selects the preset station group (A to E) when TUNER is
selected as the input source.
7