Expansions And Conversions - Fujitsu PRIMERGY TX120 S2 Options Manual

Introduction
1.4

Expansions and conversions

Main memory expansion
The system board supports up to 16 Gbyte of main memory. 4 slots (2 memory
banks with 2 slots each) are provided for the main memory. Each memory bank
can be equippeded with 1 GB, 2 GB or 4 GB unbuffered DDR2 memory
modules.
If the memory modules are installed in pairs, they must be identical (2-way inter-
leaved mode).
Additional accessible drive
A 3.5-inch bay for an HDD extension box or a backup drive is available.
Expansion cards in the PCI slots
The following PCI slots are provided by the system board:
PCI slot Description
1 PCI Express x8 slot
2 PCI Express x8 slot
3 PCI slot (32-bit/33MHz)
4 PCI Express x8 slot
TX120 S2
Expansions and conversions
Options Guide 9