Expanding/Replacing The Main Memory - Fujitsu PRIMERGY TX120 S2 Options Manual

Main memory
5.2

Expanding/replacing the main memory

Ê Open the server (see section
Ê Remove the crosspiece (see section
page 20).
Removing a memory module
1
Figure 7: Removing a memory module
Ê Fold the assembly brackets outwards on both sides of the corresponding
slot (1).
Ê If the slot was equipped: pull the memory module out of the slot (2).
TX120 S2
Expanding/replacing the main memory
"Opening the server" on page
"Removing the crosspiece" on
2
Options Guide
19).
1
25