Switching On - Sharp SX66NF8 Operation Manual

Switching on

TV Set
Main power
Power indicator
STAND-BY
CH UP/
DOWN
VOLUME
UP/DOWN
SX66/76NF8(01-)new 7
Main power
This TV memorizes the Mode last used when it was
switched off. When the MAIN POWER is pressed to turn on
the set, the Power indicator will light and the set will resume
in either the Stand-by mode or Programme mode,
depending upon its condition when it was switched off.
Stand-by
When the TV is in Stand-by mode, to turn on the TV press
STAND-BY button ( TV) on the remote control, or one of
the four buttons on the TV (
will change from Stand-by mode to Programme mode, the
Power indicator will turn green from red and an image will
appear on the screen. Press STAND-BY button (
again and the TV will return to Stand-by mode.
Blue background off timer
If weak signal conditions in TV or VCR mode, the screen will
turn blue.
The blue background off-timer is then engaged, unless a
good signal is received, the set will automatically switch to
Stand-by mode after
15 minutes.
, CH ). The TV
TV)
02.10.24, 10:40 AM
E 7