Choosing A Connection - Samsung DVD-HD937 User Manual

Choosing a Connection

The following shows examples of connections commonly used to connect the DVD player
with a TV and other components.
Before Connecting the DVD Player
• Always turn off the DVD player, TV, and other components before you
connect or disconnect any cables.
• Refer to the owner's manual of the additional components you are connecting for
more information on those particular components.
Connection to an Audio System
Method 1
AUDIO
SYSTEM
2ch Amplifier
Audio Input Jacks
DVD
PLAYER
Analog Audio Out
Method 1 DVD Player + 2ch Stereo
Amplifier or Dolby Pro Logic Decoder
DVD Player + Amplifier with Dolby Digital Decoder/DTS Decoder/MPEG-2
Method 2
12
Method 2
Dolby Digital Decoder
Digital Audio Input Jacks
OR
Digital Audio Out
ENG
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
Method 1
Basic
Video
Basic Audio
TV
AV
Cable
DVD
PLAYER
Audio Output Video Output
Jacks Jack
Method 1 DVD Player + TV with Video Input Jack
DVD Player + TV with S-Video Input Jack
Method 2
(If S-Video is selected in the VIDEO OUT SELECT.)
DVD Player + TV with Component Video Jacks
Method 3
(If Component Video is selected in the VIDEO OUT SELECT.)
NOTE
• If Component Video is selected, S-Video will not work.
• If PROGRESSIVE SCAN is set to on, VIDEO and S-VIDEO will not work.
ENG
Choosing a Connection
Method 2 Method 3
Good Better
picture picture
Video
S-Video
Cable
Cable
OR
OR
Component Video
S-Video
Jacks
Jack
13