Table of Contents
Advertisement
Choosing a Connection
PROGRESSIVE SCAN Specifications
Progressive scanning creates an improved picture with double the scan lines of a conventional interlaced
picture.
When you press the PROGRESSIVE SCAN button; (PAL disc play)
1. The 576p will be enabled at the component output when the blue light comes on.
2. The 576i will be enabled at the component output when the light turns off.
When you press the PROGRESSIVE SCAN button; (NTSC disc play)
1. The 480p will be enabled at the component output when the blue light comes on.
2. The 480i will be enabled at the component output when the light turns off.
NOTE
• If the PROGRESSIVE SCAN button is set to on, the VIDEO and S-video outputs will be disabled.
• If the PROGRESSIVE SCAN button is set to off, the LED will be turned off and all of VIDEO, S-VIDEO
and COMPONENT outputs will be enabled, which selected VIDEO OUT SELECT.
• Make sure to stop DVD playback before enabling the progressive scan function.
"CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION
SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE, IN CASE OF 525 OR 625
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE
USER SWITCH THE CONNECTION TO THE 'STANDARD DEFINITION'
OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER."
16
Before Play
• Turn on your TV and press the TV/VIDEO button to select the video
mode.
• Turn on your Audio System and select AUX, CD or DVD.
After plugging in the player, the first time you press the DVD
POWER button, this screen comes up :
If you want to select the language, press a NUMBER button.
(This screen will only appear when you plug in the player for the first
time.)
Play
1
Press the OPEN/CLOSE button.
The STANDBY indicator light goes out and the tray opens.
2
Place a disc gently into the tray with the disc's label
facing up.
3
Press the PLAY/PAUSE (
button to close the disc tray.
4
Stopping Play
Press the STOP (
5
Removing Disc
Press the OPEN/CLOSE button.
6
Pausing Play
Press the PLAY/PAUSE (
- Screen stops, no sound.
- To resume, press PLAY/PAUSE (
ENG
ENG
) button or OPEN/CLOSE
) button during play.
) or STEP button on the remote during play.
) button once again.
Playing a Disc
17
Advertisement
Table of Contents
