SET-UP INSTRUCTIONS (continued)
Position this product away from pool to prevent a child from
climbing the pool.
To inspect and change the filter cartridge, disconnect line cord, unscrew the
strainer grids (6) from the strainer connectors and insert the hat-like plugs into the
strainer connectors before servicing the filter. After service, open the air release
valve, remove the plugs, allow any air to escape through the valve before tightening
the valve again and replace the strainer grids. The pump is now primed with water
again and may be turned on.
THREADED
COVER
FILTER
CARTRIDGE
INSIDE
UPPER PUMP
CONNECTION
BOTTOM PUMP
CONNECTION
SAVE THESE INSTRUCTIONS
(58) MODEL 604 FILTER PUMP ENGLISH 7.5" X 10.5" PANTONE 295U 01/19/2007
WARNING
UPPER PROTRUDING
HOSE CONNECTION
AIR RELEASE
VALVE
HOSE
HOSE
CLAMP
WATER LEVEL
STRAINER
INSIDE OF POOL
(ILLUSTRATION NOT TO SCALE)
58
PLUG
Page 7