Table of Contents
Advertisement
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE GEFENPRO 16X16 DVI MATRIX WITH FRONT
•
The 16x16 DVI Matrix does not support HDCP content.
•
Make sure that a DVI monitor is powered and connected to one of the DVI
outputs on the 16x16 DVI Matrix before applying power. By default, the
Local EDID is read from the connected monitor and is copied to all 16 DVI
inputs once the Matrix has been turned on. If a monitor is not detected by
the Matrix at power-on, a default (internal) EDID of 640x480 will be used.
This functionality can be disabled using the Secure Local EDID function
using RS-232 or IP control.
•
There is no internal scaling in the 16x16 DVI Matrix. Each monitor attached
to the Matrix must be able to display the resolutions output by the source
device(s). For maximum compatibility it is recommended that only one
common resolution be used by each source device.
•
Advanced EDID features and IP confi guration features are accessible
through the RS-232 serial command set.
•
Routing and EDID features can be managed using the built-in IP control
feature.
IMPORTANT: If the unit is installed in a closed or multi-rack assembly, do
•
not block the ventilation holes of the enclosure.
OPERATION NOTES
PANEL PUSH BUTTON CONTROL
2
Hide quick links:
Advertisement
Table of Contents
