Table of Contents
Advertisement
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE GEFENPRO 16X16 DVI MATRIX
•
The GefenPRO 16x16 DVI Matrix does not support HDCP content.
•
Make sure that a DVI monitor is powered and connected to one of the DVI
outputs on the GefenPRO 16x16 DVI Matrix before applying power. By
default, the Local EDID is read from the connected monitor and is copied
to all 16 DVI inputs once the Matrix has been turned on. If a monitor is not
detected by the Matrix at power-on, a default (internal) EDID of 640x480 will
be used. This functionality can be disabled using the Secure Local EDID
function through IP control. See page 21 for more information.
•
There is no internal scaling in the GefenPRO 16x16 DVI Matrix. Each
monitor attached to the Matrix must be able to display the resolutions output
by the source device(s). For maximum compatibility it is recommended that
only one common resolution be used by each source device.
•
Advanced EDID features and IP confi guration features are accessible
through the RS-232 serial command set.
•
Routing and EDID features can be managed using the built-in IP control
feature.
IMPORTANT: If the unit is installed in a closed or multi-rack assembly, do
•
not block the ventilation holes of the enclosure.
OPERATION NOTES
2
Advertisement
Table of Contents
