Operating the 16x16 Modular Matrix for HDMI w/ HDCP
Basic Operation
After the AC power cord(s) is/are connected to the matrix, the LED indicator next to the
display will glow bright blue. The matrix is now in standby mode.
Standby mode LED
Standby mode is similar to powering-off the matrix. However, in standby mode, the matrix
can be powered-on by executing the
for more information on using the RS-232 / IP commands.
1.
From standby mode, press the Power button on the front panel.
2.
The standby mode LED will turn off.
3.
After a few moments, the home screen will be displayed:
GEFEN
16x16 matrix
4.
To return to standby mode, press the Power button on the front panel.
Standby Mode
#power
command. See
Powering the Matrix
page | 16
Power
RS-232 and IP Configuration