conversion kit assembly instructions
Get Started: Disassemble Stroller
1
To remove the stroller headset
[A], loosen the two hex bolts
on the side and loosen the
fl anged cap screw (with Kid
Kustoms Logo) on top the of
stroller headset.
2
Remove the two 8mm
screws [B] that connect the
stroller front chassis and rear
chassis.
3
Remove the fl ange nut [C]
then lift off the top of the
chassis.
4
Follow the instructions on
page 15 to complete the
Trike assembly.
B
14
A
C