Table of Contents
Advertisement
Perfect Combination 8-Port PoE Switch + 8-Ch NVR
PoE
PoE
FGSD-910P/
FGSD-910HP
100Base-TX UTP with PoE
PoE
1000Base-T UTP
Figure 2-8: 802.3af IP Surveillance with NVR Connection
Cable distance for switch
The cable distance between the PoE Ethernet Switch and other
network equipment should not exceed 100 meters for UTP/STP
cable.
Make sure the wiring is correct
It can use Category 3/4/5 cable in 10Mbps operation. To reliably
Note
operate your network at 100Mbps or 1000Mbps, you must use an
Unshielded Twisted-Pair (UTP) Category 5/5e/6 cable, or better
Data Grade cabling. While a Category 3 or 4 cable may initially
seem to work, it will soon cause data loss.
8 PoE IP Cameras
PoE
PoE
Gigabit Uplink
8 Channel NVR
PoE
PoE
PoE
Gigabit Switch
Monitoring Center
PoE
15
Advertisement
Table of Contents
