Samsung SyncMaster 710T User Manual page 25

Brightness
Menu
Brightness Adjust Brightness.
Source
Menu
Source Selects the Video signal while the OSD is off.
Brightness
1. Picture
2. Color Color Tone
3. Image Coarse
4. OSD Language
5. Setup Auto Source
6. Information
Picture
Menu
Adjust the Brightness.
Brightness Direct Access Feature : When OSD is not on the screen, Push
the button to adjust brightness.
Contrast Adjust the Contrast.
Color
Menu
The tone of the color can be changed and one of four modes
Color Tone
can be selected - Cool, normal, Warm and Custom.
Color Control Follow these steps to adjust individual R,G,B color balance.
Gamma Select one of three pre-defined gammas.
Image
Menu
Removes noise such as vertical stripes. Coarse adjustment may
move the screen image area. You may relocate it to the center
Coarse
using the Horizontal Control menu.
(Available in analog Mode Only)
Removes noise such as horizontal stripes. If the noise persists
even after Fine tuning, repeat it after adjusting the frequency
Fine
(clock speed).
(Available in analog Mode Only)
Sharpness Follow these instuction to change the clearance of image.
Follow these instructions to change the horizontal position of
H-Position the monitor's entire display.
(Available in analog Mode Only)
Follow these instructions to change the vertical position of the
V-Position monitor's entire display.
(Available in analog Mode Only)
Description
Description
Contrast
Color Control Gamma
Fine Sharpness
H-Position V-Position
Image Reset Color Reset
Description
Description
Description
H-Position V-Position
Transparency Display Time
Play/Stop
Play/Stop
Play/Stop