Electrical Connection; Adjusting The Feet; Illumination Lamp - Beko ASD241B Installation & Operating Instructions Manual

Installation

3.3. Electrical connection

Connect the product to a grounded outlet
protected by a fuse complying with the values in
the rating plate. Our company shall not be liable
for any damages that will arise when the product
is used without grounding in accordance with the
local regulations.
• Electrical connection must comply with national
regulations.
• Power cable plug must be within easy reach
after installation.
• The voltage and allowed fuse or breaker
protection are specified in the Rating Plate
which is affixed to interior of the product. If
the current value of the fuse or breaker in the
house does not comply with the value in the
rating plate, have a qualified electrician install a
suitable fuse.
• The specified voltage must be equal to your
mains voltage.
• Do not make connections via extension cables
or multi-plugs.
B
WARNING:
be replaced by the
Agents.
WARNING:
B
it should not be operated unless it is
repaired by the
Agent! There is the risk of electric shock!

3.4. Adjusting the feet

If the product stands unbalanced after installation
adjust the feet. Taking help from someone to
slightly lift the refrigerator will facilitate this
process.
B
WARNING:
Product must not be plugged in when
adjusting the feet. There is the risk of
electric shock!
Turn the front feet to balance the product. The
corner where the foot exists is lowered when you
turn in the direction of arrow and raised when you
turn it in the opposite direction.

3.5. Illumination lamp

Do not attempt to repair yourself but call the
Authorised Service Agent if the LED illumination
lamps do not go on or are out of order.
8 / 27 EN
Damaged power cable must
Authorised
Service
If the product has a failure,
Authorised
Service
First unplug the product.
Refrigerator / User Manual