Assembly Instructions - Flymo Chevron 34C Original Instructions Manual

A
B
C
D
1
2

Assembly Instructions

E
When received from the Manufacturer,
the wheels are in a raised position.
Do not switch on the product
before removing from the raised posi-
tion into position 5.
Assembly of Lower Handles to Deck
1. Insert lower handles into the deck and push down (B).
2. Using a pozi drive screwdriver insert the screws into the
deck and handles and fully tighten (C).
Assembly of Upper Handles to Lower Handles.
1. Ensure the upper handle is located correctly with the
lock-off button on the switchbox uppermost.
2. Insert the nut into the handle knob.(D1)
3. Ensure the upper handle and the lower handle are
aligned correctly (D2).
4. Fit the bolts, washers and handle knobs (D2).
5. Fit the cable to the handles with the clips provided.
Make sure the cable is not trapped between the upper
and lower handles.
Attaching the Cable Hooks (for storage of the mains cable)
1. Insert the post on the Cable Hook through the hole in the
Upper Handle (E).
2. Insert the Screw and tighten to secure (E)
Repeat for the other side.
Grassbox Assembly
1. Locate the grassbox lid onto the grassbox by aligning the clips.
Ensure all the clips are correctly located before clicking
into position. (F)
F