Options And Accessories; Baskets For Jumbo Buns - Hatco TRH Series Installation And Operating Manual

OPTIONS AND ACCESSORIES

4" (102 mm) Adjustable Legs
4" (102 mm) adjustable legs are available as accessories for all
models. Use the following procedure to install the legs.
NOTICE
Do not lay unit on the side with control panel or manual
advance knob. Damage to unit could occur.
1. Carefully place unit on its side.
2. Thread the 4" (102 mm) adjustable legs into the existing leg
holes on the bottom of the unit.
3. after all legs are secure, return the unit to the upright
position.
4. Level the unit by turning the
adjustable tip on each leg. Use a
5/8" (16mm) open-end wrench to
make leveling adjustments.
Shorten
Lengthen
Adjustable Tip
14

Baskets for Jumbo Buns

Baskets for Jumbo Buns are available as accessories for TK-
100, TK-135B, and TK-155B models only. These baskets
accommodate large buns up to 5-1/2" (140 mm) in diameter.
Security Control Cover
an optional security control cover is available for all models (not
for field retrofit). a security control cover includes the control
cover, bracket, and mounting hardware. TK models come with
a fuse cover.
Receptacles
Receptacles are available as accessories for units using
NEma 5-20P, NEma 5-30P, or NEma 6-30P plugs.
Mounting Brackets
mounting brackets are available as accessories to securely and
permanently mount a toaster. The brackets are installed in the
leg mounting holes. Fasteners not supplied.
Form No. TRTKm-0812