Specifications; General Safety Precautions; Instruction Manual - Makita LS1018 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model
Blade diameter
Hole diameter
Max. Cutting capacities (H x W)
Miter angle
0°
45°
60° (right)
No load speed (RPM)
Laser Type (LS1018L only)
Dimensions (L x W x H)
Net weight
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
For Your Own Safety Read

Instruction Manual

Before Operating Tool
Save it for future reference
GENERAL SAFETY
PRECAUTIONS
(For All Tools)
1. KNOW YOUR POWER TOOL. Read the owner's
manual carefully. Learn the tool's applications
and limitations, as well as the specific
potential hazards peculiar to it.
2. KEEP GUARDS IN PLACE and in working
order.
3. REMOVE ADJUSTING KEYS AND WRENCHES.
Form habit of checking to see that keys and
adjusting wrenches are removed from tool
before turning it on.
4. KEEP WORK AREA CLEAN. Cluttered areas
and benches invite accidents.
45° (left)
50 mm x 305 mm
(2" x 12")
(left) 50 mm x 200 mm
(2" x 7-7/8")
(right) 50 mm x 215 mm
(2" x 8-1/2")
-
USA007-2
Bevel angle
0°
91 mm x 305 mm
(3-5/8" x 12")
91 mm x 215 mm
(3-5/8" x 8-1/2")
91 mm x 150 mm
(3-5/8" x 5-7/8")
Wavelength 660 nm, Maximum output
5. DO NOT USE IN DANGEROUS ENVIRONMENT.
Do not use power tools in damp or wet
locations, or expose them to rain. Keep work
area well lighted. Do not use tool in presence
of flammable liquids or gases.
6. KEEP CHILDREN AWAY. All visitors should be
kept safe distance from work area.
7. MAKE WORKSHOP KID PROOF with padlocks,
master switches, or by removing starter keys.
8. DO NOT FORCE TOOL. It will do the job better
and safer at the rate for which it was designed.
9. USE RIGHT TOOL. Do not force tool or
attachment to do a job for which it was not
designed.
10. WEAR PROPER APPAREL. Do not wear loose
clothing, gloves, neckties, rings, bracelets, or
other jewelry which may get caught in moving
parts. Nonslip footwear is recommended.
Wear protective hair covering to contain long
hair.
11. ALWAYS USE SAFETY GLASSES. Also use
face or dust mask if cutting operation is dusty.
Everyday eyeglasses
resistant lenses, they are NOT safety glasses.
12. SECURE WORK. Use clamps or a vise to hold
work when practical. It's safer than using your
2
LS1018 / LS1018L
255 mm (10")
15.88 mm (5/8")
45° (right)
31 mm x 305 mm
(1-1/4" x 12")
31 mm x 215 mm
(1-1/4" x 8-1/2")
-
4,300/min.
1mW (Laser Class II)
825 mm x 536 mm x 633 mm
(32-1/2" x 21-1/8" x 25")
19.8 kg (43.7 lbs)
only have impact