When Disposing The Network Walkman - Sony Walkman NW-MS70D Operating Instructions Manual

Portable memory stick audio player network walkman
Hide thumbs Also See for Walkman NW-MS70D:
Table of Contents

Advertisement

Precautions (continued)
On handling the "Memory Stick Duo"
Do not label "Memory Stick Duo" to prevent
sticking
it
in the slot.
You cannot record, edit, or delete data stored in
a "Memory Stick" when the erasure prevention
switch is set to "LOCK."
(m)
prevention switch.
or writing data.
to data.
-
Remove "Memory Stick" or turn off your
Use a tapered tool when you set the erasure
Do not remove "Memory Stick" while reading
Do not perform the following to prevent damage
Network Walkman while reading or writing
data.
location under the influence of static charge or
electrical noise.
-
Operate your Network Walkman in the
Making a backup
of
important data is
Do not apply too much pressure to "Memory
recommended.
Stick" when you write down in the memo area.
(El)
Keep a "Memory Stick'' in its supplied case
when you carry or store it.
Do not touch the "Memory Stick" connector
with your finger or metallic objects.
(m)
Do not bend, drop, or subject
a
"Memory Stick"
to strong shock.
Do not disassemble or modify a "Memory
Stick".
Do not allow a "Memory S t i c k to get wet.
Do not use or store your Network Walkman in a
location that is subjected to:
-
Extremely high temperature such as in a sun-
-
Direct sunlight
-
High humidity or places with corrosive
heated car
substances
When disposing the
Network Walkman
This Network Walkman has a built-in nickel metal
hydride battery. When you dispose of the Network
Walkman, be sure to dispose of it properly.
Certain countries may regulate disposal of the battery
used
to power this
product.
Please consult with your local authority.
m !
Never disassemble your Network Walkman except when
disposing of
it.
To remove the Nickel Metal Hydride
battery
0
Remove the screws
(@
and
@)
at the sides
using
a
Phillips screwdriver.
@
Remove the cover.
Nickel Metal Hydride
battery
@
Disconnect the connector and then remove the
@
Insulate the connector terminal by wrapping
battery.
with a tape
38

Advertisement

Table of Contents
loading

Table of Contents