Sony Walkman NW-MS70D Operating Instructions Manual page 14

Tkansferring audio files from the computer
to your Network Walkman (Checklout)
m
Before connecting your Network Walkman
to
the computer for the first time, be sure to install the
"SonicStage" software and "NW-MS70D driver file" from the supplied CD-ROM in your computer.
Even if the SonicStage software is already installed, you need to install not only the "NW-MS70D
driver file" but also the "SonicStage" software before connecting your Network Walkman to the
computer (update programs may be available.)
1
Install
the
SonicStage software and NW-MS70D driver file in your computer using the
supplied CD-ROM.
Follow step 1 only for the first time when you connect your Network Walkman to the computer.
For details, refer to the SonicStage operating instructions.
2
Transfer audio files to the SonicStage software.
For details, refer to the manual "SonicStage operating instructions."
3
Connect your Network Walkman to the computer.
@Insert
"MG
Memory Stick Duo" (not supplied) into the slot of your Network Walkman.*
While a "Memory Stick" is inserted,
a
is indicated in the display of your Network Walkman.
*
Your Network WaIkman comes equipped with 256MB built-in flash memory. You can use your Network
Walkman without external memory. When you do not use "Memory Stick", skip step
@
and follow step
0.
"Men
slot
When connecting your Network Walkman to
the computer, make sure that the erasure
prevention switch (page 38) of
"Memory Stick
Duo" is not set
to
"LOCK."
Insert "Memory Stick Duo" into the slot until it
clicks into the place.
To remove "Memory Stick Duo", refer to page
19.
Do not label "Memory Stick Duo" to prevent
sticking it in the slot.
14