Flash Bios Protect (Jp8); Flash Bios Write-Enable Voltage (Jp13) - Aaeon SBC-455 Product Manual

Flash BIOS Protect (JP8)

You can set the JP8 to protect BIOS write-enable. The configura-
tion is as follows:
Write protect (default) Write-enable

Flash BIOS Write-enable Voltage (JP13)

This jumper sets the voltage supplied to the Flash BIOS Write-
enable. The figure below shows the proper jumper settings for
both 5V and 12V voltage.
5 V (default) 12 V
Chapter 2 Installation 33