Tuning Your Television For The Dvd-Vcr - Samsung DVD-V5450 User Manual

Settings
• Tuning Your Television for the DVD-VCR . . 17
• Setting the Date and Time . . . . . . . . . . . . . . 18
• Setting the Menu Language . . . . . . . . . . . . . 19
• Presetting the Stations Automatically . . . . . 19
• Presetting the Stations Manually . . . . . . . . . 21
• Clearing a Preset Station . . . . . . . . . . . . . . . 22
• Changing the Preset Station Table . . . . . . . . 23
• Selecting the RF OUT Sound Mode (B/G-D/K) . 24
• Setting the VCR Output Channel . . . . . . . . . 24
Tuning Your Television
for the DVD-VCR
You must tune your television for the DVD-VCR only
if you are using the RF cable.
To view pictures from your DVD-VCR when a
audio/video cable is used, the television must be set
to the audio/video mode (AV).
1 Switch on the television.
2 Switch on the DVD-VCR by pressing the
/I STANDBY/ON on the front of the DVD-VCR
or STANDBY/ON on the remote control.
3 Select a programme position on the television
to be reserved for use with your DVD-VCR.
4 Insert the video cassette in the DVD-VCR.
Check that the DVD-VCR starts reading the
cassette; if not, press the √II button.
5 Start a scan on your television or set the
television to UHF channel 36.
6 Fine tune the television until the pictures and
sound are obtained clearly.
7 When the picture and sound are perfectly clear,
store this channel at the desired programme
position on the television.
That programme is now reserved for use with
your DVD-VCR.
English - 17