D-Sub/Bnc; Menu Position - Samsung SyncMaster 1100P Plus Owner's Instructions Manual

6_1100pE8p23p.fm Page 20 Friday, February 23, 2001 4:06 PM
Adjusting Your Monitor

D-SUB/BNC

RGB
Advanced
Degauss
Recall
+++
Sync. Input Type
G
Video Input Level
D-SUB/BNC
:
Access Function
D-SUB BNC
:

Menu Position

RGB
Menu
Menu Position
Menu Duration
Languages
:
Access Function
Menu Position
:
Previous Menu
20
Use this menu to choose between the signal source
connected to the BNC connector input and the
signal source connected to the D-SUB connector
input.
1
With the menu off, push the
Push the
"Advanced" screen is displayed.
2
Push the
D-SUB/BNC.
3
Push the
BNC selection screen.
4
Use the button or
D-SUB or BNC.
NOTE: When you are finished, wait for a few
seconds and the screen will blank then
display the image from the new signal
source (Other computer). A cable must be
connected to both inputs to use this
function.
You can change the position where the OSD menu
appears on your monitor.
1
With the menu off, push the
Push the
"Menu" screen is displayed.
2
Push the
Menu Position.
3
Push the
position adjustment screen.
2
4
Use the ,
8
the menu in the position you prefer.
button.
button or button until the
button or button to select
button to open the D-SUB/
button to select
button.
button or button until the
button or button to select
button to open the menu
, or button to place