Appendix; Powersaver - Samsung SyncMaster 1100P Plus Owner's Instructions Manual

6_1100pE8p23p.fm Page 22 Friday, February 23, 2001 4:06 PM

PowerSaver

This monitor has a built-in power management system called PowerSaver. This power
management system saves energy by switching your monitor into a low-power mode when it
has not been used for a certain amount of time. The available modes are "On," "Standby,"
"Suspend," and "Off".
This power management system operates with a VESA DPMS compliant video card installed
in your computer. You use a software utility installed on your computer to set up this feature.
See the table below for details.
Table 1. Power-saving modes
State
Horizontal Sync Active
Vertical Sync Active
Video Active
Power
Green
Indicator
Power 140W (Max.)
Consumption 120W (Nom.)
NOTE: This monitor automatically returns to normal operation when horizontal and vertical
sync return. This occurs when you move the computer's mouse or press a key on the
keyboard.
This monitor is EPA E
NERGY
computer equipped with VESA DPMS functionality.
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods.
22

Appendix

Power-Saving Function mode (EPA/ENERGY 2000)
Normal
Operation
Standby Mode
Inactive
Active
Blanked
Amber
60W(Nom.)
TAR ®
S compliant and ENERGY 2000 compliant when used with a
Suspend Mode Power-off Mode
Position A1 Position A2
Active Inactive
Inactive Inactive
Blanked Blanked
Amber/Green Amber
Blinking Blinking
(0.5 sec interval) (1 sec interval)
Less than 15W Less than 3W