Menu Position; Menu Duration; D-Sub/Bnc - Samsung SyncMaster 900IFT Owner's Instructions Manual

SE-900IFT-E
Great user manuals database on
4/29/92 5:23 PM Page 11

Menu Position

You can change the position where the menu appears on
Hz your monitor.
G
Menu Position
With the menu off, push the MENU button. Push the
1
$
is displayed.
Previous Menu
2 Push the
adjustment screen.
3 Use the
the position you prefer.

Menu Duration

The menu will automatically turn off if no adjustments are
Hz
G
made for a certain time period. You can set the amount of
Menu Duration
time the menu will wait before it turns off.
3 7 10 20 50
1 With the menu off, push the MENU button.
(Seconds)
Push the
Previous Menu
Duration" screen is displayed.
2 Push the
selection screen.
3 Use the
seconds. 10 seconds is the default value.

D-SUB/BNC

Use this menu to choose between the signal source
connected to the BNC connector input and the signal
source connected to the D-SUB connector input.
1 With the menu off, push the MENU button.
Push the
screen is displayed.
2 Push the
screen.
3 Use the
"D-SUB".
NOTE: When you are finished, wait for a few seconds and
the screen will blank then display the image from the
new signal source (Other computer). A cable must
be connected to both inputs to use this function.
UserManuals.info
Chapter Three: Adjusting Your Monitor
%
button or button until the "Menu Position" screen
button to open the menu position
, , $ or % buttons to place the menu in
$ %
button or button until the "Menu
button to open the menu duration
$ or % buttons to select 3, 7, 10, 20, or 50
$ button or % button until the "D-SUB/BNC"
button to open the D-SUB/BNC selection
$ %
button or button to select "BNC" or
11