Hitachi DH 40MR Technical And Service Manual page 9

5. Chemical anchor holes drilling work (Rotation + Hammering)
(Socket)
Socket square size
6. Demolition work (Hammering)
(1) Bull point (SDS max shank)
Overall length
280 mm (11")
400 mm (15-3/4")
7. Grooving and edging (Hammering)
(1) Cold chisel (SDS max shank)
Overall length
280 mm (11")
400 mm (15-3/4")
8. Cutting and stripping (Asphalt cutting etc.) (Hammering)
(1) Cutter (SDS max shank)
Overall length
400 mm (15-3/4")
9. Digging (Substitute pick-ax) (Hammering)
(1) Scoop (SDS max shank)
Overall length
400 mm (15-3/4")
+
(1) Chemical anchor adapter
(SDS max shank)
12.7 mm (1/2")
19.0 mm (3/4")
+
Code No.
313471
313472
+
Code No.
313473
313474
+
50 mm (2")
+
Code No.
313476
+
Code No.
313469
313470
Width
--- 6 ---
Code No.
313475