Advertisement
Installing side grip (auxiliary handle)
Screw the side grip on the tool securely.
The side grip can be installed on either side
of the tool, whichever
is
convenient.
Installing or removing depressed center wheel
CAUTION
:
Always be sure that the tool i s switched off and unplugged before installing or removing
the wheel.
Mount the inner flange onto the spindle.
Fit the wheel on over the inner flange and
screw the lock nut onto the spindle.
To tighten the lock nut, press the shaft
lock firmly
so
that the spindle cannot re-
volve, then use the lock nut wrench and
securely tighten clockwise.
Lock
n u t
Lock nut
wrench
I
To remove the wheel, follow the installation procedure in reverse.
6
Advertisement
