Advertisement
VOLTAGE WARNING: Before connecting the tool t o a power source (receptacle,
outlet, etc.) be sure the voltage supplied is the same as that specified on the
nameplate of the tool.
A
power source w i t h voltage greater than that specified
for the tool can result in SERIOUS INJURY t o the user
-
as well as damage t o
the tool. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source
with
voltage less than the nameplate rating is harmful t o the motor.
For all grounded tools with American type plug.
GROUNDING INSTRUCTIONS: This tool should be grounded while in use t o
protect the operator from electric shock. The tool is equipped with a three-
conductor cord and three-prong grounding-type plug t o fit the proper
grounding-type receptacle. The green (or green and yellow) conductor
in
the
cord is the grounding wire. Never connect the green (or green and yellow) wire
t o a live terminal. Your unit is for use on
115
volts and has a plug that looks
like Fig.
"A'.
An adapter Fig. "6" and
"C"
is available for connecting Fig.
"A'
type plugs
t o two-prong receptacles. The green-colored rigid ear, lug, etc., extending from
the adapter must be connected t o a permanent ground, such as a properly
grounded outlet box.
Grounding Blade
Cover of Grounded Outlet Box
FIG. C
A
Adapter
-
Grounding Mea
4
Advertisement
