West Bend ELECTRIC HOT POT Instruction Manual page 4

Always make sure Hot Pot is unplugged from electrical outlet and the entire
appliance has cooled before cleaning.
1. Fill Hot Pot with hot tap water to the 3-cup level. Add a small amont of dish
soap and wash inside of pot with a dishcloth or sponge. Drain pot, rinse inside
with tap water and dry.
2. Wash cover in hot soapy water, rinse and dry.
Do not use metal scouring pads or harsh cleansers on Hot Pot or cover as
scratching will occur. Do not wash cover or Hot Pot in an automatic
dishwasher.
Special Cleaning to Remove Mineral Deposits: Over time, mineral deposits from
water will build up on the inside of the Hot Pot. These deposits must be removed to
prevent possible pitting and damage to the metal bottom, which can cause water to
leak out of pot. To prevent severe buildup of mineral deposits, always empty and
clean after each use.
1. Fill pot to the 3-cup level with white distilled vinegar and add water to the 5-cup
level. Secure cover onto pot and plug into electrical outlet. Allow solution to
heat for 20 to 30 minutes, or until deposits are dissolved.
2. Unplug cord from electrical outlet, drain pot and allow to cool before cleaning,
following general cleaning instructions above.
C Y
LEANING OUR
A
PPLIANCE
4