Ordering Information - Intel D915GVWB Product Brief

Intel Desktop Board D915GVWB
®
Processor
Processors Supported • Intel ®
system bus in the LGA775 package
• Intel ®
system bus in the LGA775 package
•Supports boxed Intel
designated by 04A or 04B Platform Compatibility
Guide
Intel ® 915GV Express • Intel ®
Chipset (GMCH)
• Intel ®
• Firmware Hub (FWH)
Graphics Memory Designed to support up to 4 GB
Controller Hub (GMCH) using DDR400/333 SDRAM memory
Intel ® ICH6 I/O Controller Hub • Four SATA (1.5 Gb/s) ports
• Up to two ATA 100/66 devices
• Intel ®
I/O Features • Integrated super I/O LPC bus controller
• One PCI Express* x1 local bus slot
• Two PCI local bus slots
USB 2.0 Integrated Intel
• Four back-panel ports (two dual stack)
• Four front-panel ports (via 2-headers requiring
cabling to front panel)
Firmware Hub
System BIOS • 4-Mb Flash EEPROM featuring the Intel
Innovation Framework for EFI Plug and Play, IDE
drive auto-configure
• Advanced configuration and power interface V1.0b,
DMI 2.0, multilingual support
Intel ® Rapid BIOS Boot • Optimized POST for faster access to PC from
power-on
System Memory
Memory Capacity • Four 184-pin DIMM connectors supporting up to
two double-sided DIMMs
Memory Types • DDR400/333 SDRAM Memory Support
• Non-ECC RAM (ECC memory will attempt to run
in Non-ECC mode only)
Memory Modes • Dual- and single-channel operation support
Memory Voltage • 2.5V
Hardware Management Features
• Processor fan speed control
• System chassis fan speed control
• Voltage and temperature sensing
• Fan sensor inputs used to monitor fan activity
• Power management support for ACPI 1.0b
1 Intel ® Desktop Board D915GVWB was designed to support up to 4-GB total system memory using DIMMs based on 512-Mbit or 1-Gbit technologies. 1-Gbit technology has not
been validated on this Intel
support/motherboards/desktop/
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL
INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS,
INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS
INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT.
Intel products are not intended for use in medical, life-saving, or life-sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice.
All products, dates and figures specified are preliminary based on current expectations, and are subject to change without notice. Availability in different channels may vary.
The Intel ® desktop boards, processors, and chipsets may contain design defects or errors known as errata, which may cause the product to deviate from published specifications.
Current characterized errata are available on request.
Intel, Pentium, Celeron, and the Intel logo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
* Other names and brands may be claimed as the property of others.
** Intel ® Desktop Utilities includes: hardware monitoring, Diskeeper* Lite defragmentation, NTI Backup Now*, StressTest*, Symantec* Security Check
† Available by Internet download only. Third-party user registration required.
Copyright © 2004 Intel Corporation. All rights reserved.
Pentium ® 4 processors with 800-MHz
Celeron ® D processors with 533-MHz
® processors with packaging
82915GV Graphics Memory Controller Hub
82801DB I/O Controller Hub (Intel ® ICH6)
1 of system memory
PRO 10/100 network connection (optional)
® ICH6 controllers:
® Platform
See Intel's Web site at
For the most current product information available, visit Intel's Web site at:
developer.intel.com/design/motherbd/
® desktop board. For more information about the latest list of tested memory, refer to the Intel World Wide Web site at: http://support.intel.com/
Wake-Up From Network
• Wired for Management (WfM) 2.0-compatible
• Support for system wake-up using an add-in network
Expansion Capabilities
• Two PCI bus add-in card connectors
• One PCI Express* x1 bus add-in card connector
Jumpers and Front-Panel Connectors
Jumpers • Single configuration jumper design
• Jumper access for BIOS configuration mode
Front-Panel Connectors • Reset, HD LED, Power LEDs, power on/off
• Two front-panel Hi-Speed USB 2.0 headers
• Front-panel audio header
Mechanical
Board Style • MicroATX 1.0-compliant
Board Size • 9.6" x 9.6"
Baseboard Power
Requirements • ATX 12V or SFX 12V
Environment
Operating Temperature • 0° C to +55° C
Storage Temperature • -40° C to +70° C
Regulations
Safety Regulations
U.S. and Canada UL 1950, Third edition—CAN/CSA C22.2 No. 950-95
with recognized U.S. and Canadian component marks
Europe Nemko* certified to EN 60950
International Nemko certified to IEC 60950 (CB report with CB
certificate)
EMC regulations (tested in representative chassis)
U.S. FCC Part 15, Class B
U.S. FCC Part 15, Class B open-chassis (cover off) testing
Canada ICES-003, Class B
Europe EMC directive 89/336/EEC; EN 55022:1998 Class B;
EN 55024:1998
Australia/New Zealand AS/NZS 3548, Class B
Taiwan CNS 13438, Class B
International CISPR 22:1997, Class B
Power requirements vary. Complies with US CRF via EN55022 +6 db in system
configurations with an open chassis and EU Directive 89/336/EEC and use via
EN55022 and EN50082-1 in a representative chassis.

Ordering Information

www.intel.com
® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY
interface card with remote wake-up capability or
integrated LAN
1104/MS/AT/PDF C304563-001