Power Management System
This monitor meets VESA
standards. For the monitor's power saving feature to work, the video board or
computer must also meet VESA DPMS standards.
State
On
Standby
Suspend
Off
Note:
The Q71 complies with European NUTEK Power Management Standards.
Note:
The Off state means the monitor is in the lowest DPMS state with the
highest power savings.
The monitor goes into these power saving stages with the following video
synchronization signals:
State
On
Standby
Suspend
Off
The monitor automatically goes through the Power Management System steps
when it is idle.
To conserve energy, we recommend turning the monitor off at the power
switch when it will not be used for long periods of time.
Optiquest Q71
®
™
DPMS
(Display Power Management Signaling)
LED
green
yellow
yellow
yellow
Horizontal Sync
On
Off
On
Off
Power
Recovery Time
150 watts (typical)
<30 watts
<8 watts
<8 watts
Vertical Sync
On
On
Off
Off
N/A
<3 sec
<10 sec
<10 sec
Operation
19
E
N
G
L
I
S
H