Monitor Stand Removal - ViewSonic Optiquest Q71 User Manual

Monitor Stand Removal

If you want your monitor to sit flat on top of a desktop computer or desk, you
can remove the stand.
To remove the stand:
2. Locate the small circular hole in the stand. Revolve the stand until the hole
lines up with a screw. Remove the screw with a Phillips head screw driver.
Optiquest Q71
1. Place the monitor face
down on soft material,
such as a folded towel.
The towel is to prevent
scratches on the glass.
Press the locations
shown in the drawing to
release the lock tab.
3. After the lock tab is
released, pull the
monitor stand up at an
angle.
4. Remove the stand and
store in the monitor's
shipping carton.
5
Getting Started
E
N
G
L
I
S
H