Adel CBI2410A Instruction Manual

A D E L s y
A D E L s y
CBI2410A – CBI2410A/S – CBI2410ARJ
Thank you for having chosen one of our products for your work. We are certain that it will give the utmost satisfaction and be a notable
help on the job.

General Description:

OUTPUT N°1
Battery module
OUTPUT N°2
Load Vdc Output
Monitor Led
Vac Input
Application
CBI battery charger is a range of microprocessor-power supplies witch correctly charge sealed lead-acid batteries at all time
maximizing performance and life span.
Charge the battery in multi-stage principle, Fast and Trickle and automatically the device, check the battery efficiency in a lifetime to
prevent any risk of damage to the battery and allow leaving the charger permanently connected. Before begin the operations of
installation consult the manual.
Mains Characteristic
Nominal Input Voltage: 115 / 230 Vac
OUTPUT 1: for connection to Battery
OUTPUT 2: for connection to Load
Fast and trickle battery charge In according to DIN 41773
Signaling: replace battery, low battery, mains or buffering
Overload and short circuit protections
Safety isolation in according with EN 60950
Output 24 Vdc 10 A 50° C also without mains
Degree of protection IP20
Rail DIN mounting

Instruction Manual

ADEL system srl Via L. Barchi 9/B, 42100 Reggio Emilia (Italy) – Tel. ++39-0522-345518
Fax. ++39-0522-345551 – Internet: www.adelsystem.com – e-mail: info@adelsystem.it
s t e m
s t e m
Intelligent Battery Charger
Mains or
Backup
Low Battery
Battery replacement
Charging Level
Battery Type
Configuration Jumper
Bridge
Only 115Vac
CBI2410A_R8 Eng.doc
or