Advertisement
Quick Links
A
D
E
L
s
y
s
t
A
D
E
L
s
y
s
Intelligent Battery Charger
Thank you for having chosen one of our products for your work. We are certain
that it will give the utmost satisfaction and be a notable help on the job.
General Description:
OUTPUT N°1
Battery module
OUTPUT N°1
Battery module
OUTPUT N°1
Battery module
Charging Level
OUTPUT N°1
Battery module
OUTPUT N°1
Battery module
Vac Ingresso
OUTPUT N°1
Battery module
Application
CB battery charger is a range of microprocessor-power supplies witch correctly charge sealed lead-acid
OUTPUT N°1
and nickel-cadmium batteries at all time maximizing performance and life span.
Battery module
Charge the battery in multi-stage principle, Fast and Trickle and automatically the device, check the battery
quality in a lifetime to prevent any risk of damage to the battery and allow leaving the charger permanently
OUTPUT N°1
connected. Before begin the operations of installation consult the manual.
Battery module
OUTPUT N°1
Mains Characteristic
Battery module
•
Nominal Input Voltage: 115-230-277 Vac
OUTPUT N°1
•
OUTPUT 1: for connection to Battery
Battery module
•
Fast and trickle battery charge In according to DIN 41773
•
Signalling: fault status of the battery (not available on LC type)
OUTPUT N°1
•
Overload and short circuit protections
Battery module
•
Power limited Battery output
•
Safety isolation in according with EN 60950
OUTPUT N°1
•
Battery module
Degree of protection IP20
•
Rail DIN mounting
OUTPUT N°1
Battery module
OUTPUT N°1
Battery module
OUTPUT N°1
Instruction Manual
Battery module
ADEL system srl Via L. Barchi 9/B 42124 Reggio Emilia (Italy) – Tel. ++39-0522-345518
OUTPUT N°1
Fax. ++39-0522-345551 – Internet: www.adelsystem.com
Battery module
e
m
t
e
m
CB123A
Fault Status
Monitor Led:
•
Fault
•
Diagnosis
Battery Type
Configuration Jumper
CB123A_R8_ A24.AAA.010A8_Eng
Advertisement
Related Manuals for Adel CB123A
Summary of Contents for Adel CB123A
- Page 1 Rail DIN mounting OUTPUT N°1 Battery module OUTPUT N°1 Battery module OUTPUT N°1 Instruction Manual Battery module ADEL system srl Via L. Barchi 9/B 42124 Reggio Emilia (Italy) – Tel. ++39-0522-345518 OUTPUT N°1 Fax. ++39-0522-345551 – Internet: www.adelsystem.com Battery module CB123A_R8_ A24.AAA.010A8_Eng...
- Page 2 _________________________________________________________Battery Charger Rail mounting: • The module must be mounted in vertical position. • Other modules must have a minimum vertical distance of 10 cm to this power supply in order to guarantee sufficient auto convection. • Mounting scheme: Assembly: pull down the plastic block with a screwdriver, place the CB on the rail and release the plastic block.
- Page 3 _________________________________________________________Battery Charger Battery Type Configurations Caution: Switch off the system before Setting the jumper. Jumpers positions for charging: Sealed Lead: Fast=2.40V/cell Trickle=2.27V/cell Open Lead: Fast=2.40V/cell Trickle=2.23V/cell NiCd: Fast=Imax, 8 hours max Trickle=10% Imax NiCd: Fast=Imax, 16 hours max Trickle=20% Imax Battery Battery Type...
- Page 4 _________________________________________________________Battery Charger Features Input Data Nominal Input Voltage (2 x Vac) 115-230-277 Vac Input voltage range 90 ÷ 305 Vac Inrush Current (Vn – In) 7 5 msec. Frequency 47 ÷ 63 Hz Input Current (Nominal input Voltage) 0.5 - 0.3 A Internal Fuse External Fuse (recommended)
Need help?
Do you have a question about the CB123A and is the answer not in the manual?
Questions and answers