Adel CB123A/48 Instruction Manual

A D E L s y s t
A D E L s y s
Intelligent Battery Charger
Thank you for having chosen one of our products for your work. We are certain
that it will give the utmost satisfaction and be a notable help on the job.
General Description:
OUTPUT N°1
Battery module
OUTPUT N°1
Battery module
OUTPUT N°1
Battery module
Charging Level
OUTPUT N°1
Battery module
OUTPUT N°1
Battery module
Vdc Input
OUTPUT N°1
Battery module
Application
CB battery charger is a range of microprocessor-power supplies witch correctly charge sealed lead-acid
OUTPUT N°1
and nickel-cadmium batteries at all time maximizing performance and life span.
Battery module
Charge the battery in multi-stage principle, Fast and Trickle and automatically the device, check the battery
quality in a lifetime to prevent any risk of damage to the battery and allow leaving the charger permanently
OUTPUT N°1
connected. Before begin the operations of installation consult the manual.
Battery module
OUTPUT N°1
Mains Characteristic
Battery module
•
Nominal Input Voltage: 48 Vdc
OUTPUT N°1
•
OUTPUT 1: for connection to Battery
Battery module
•
Fast and trickle battery charge In according to DIN 41773
•
Signaling: fault status of the battery
OUTPUT N°1
•
Overload and short circuit protections
Battery module
•
Power limited Battery output
•
Safety isolation in according with EN 60950 OUTPUT N°1
•
Battery module
Degree of protection IP20
•
Rail DIN mounting
OUTPUT N°1
Battery module
OUTPUT N°1
Battery module
OUTPUT N°1
Instruction Manual
Battery module
ADEL system srl Via L. Barchi 9/B 42124 Reggio Emilia (Italy) – Tel. ++39-0522-345518
OUTPUT N°1
Fax. ++39-0522-345551 – Internet: www.adelsystem.com
Battery module
e m
t e m
CB123A/48
Fault Status
Monitor Led:
•
Fault
•
Diagnosis
Battery Type
Configuration Jumper
CB123A_48_A24.AAA.015A1_R1_Eng