Table of Contents
Advertisement
01DVDR980UMUKGB24271F3
21-01-2002
Connecting to other equipment
Use the top
connector (EXT 2) on your DVD
SCART
recorder to make connections to a:
- Satellite receiver or Set top box,
- VCR,
- DVD-Video player
Most pre-recorded video cassettes and DVD discs are
copy protected. If you try to copy them the display
shows 'COPY PROTECT'.
For installation of a decoder, see 'User Preferences' -
'Installation'.
1
4
EXT 4
EXT 3
Set top box
Notes:
- If the power is off or Low Power Standby is selected (see
User Preferences - features), the signal from EXT 2 will not
be passed on to the TV set on EXT 1.
- EasyLink functionality will not be available to devices
connected via the DVD recorder's EXT 2
10 INSTALLATION
15:23
Pagina 10
TV
3
2
5
AUX- I/0
EXT 2
TO TV I/0
EXT 1
connector.
SCART
Connections - frontside of your
DVD recorder
Camcorder connection
l If you have a DV, Digital 8, Hi-8 or S-VHS(C)
camcorder, connect the S-video input socket to the
corresponding output socket on the camcorder,
using the S-video cable supplied (1) and connect the
audio cable (3) supplied.
l Otherwise connect the Video input socket (yellow)
to the corresponding output socket on the
camcorder using the video cable supplied (2) and
connect the audio Left (white) and Right (red) input
sockets to the corresponding sockets on the
camcorder using the audio cable supplied (3).
l If your camcorder has mono sound, use only the left
audio connector. In this case the sound will be
recorded on both audio channels.
S-VIDEO
VIDEO
AUDIO
L
R
1
Camcorder
Camcorder
2
3
Advertisement
Table of Contents
