Connecting To A Receiver With Two Channel Analogue Stereo; Connecting To Other Equipment; Connections - Frontside Of Your Dvd Recorder; Camcorder Connection - Philips ShowView DVDR980 User Manual

Connecting to a receiver with two channel
analogue stereo
l If you have a receiver with two-channel analogue
stereo without any of the above mentioned sound
systems, connect the audio Left and Right output
sockets to the corresponding sockets on your
receiver, amplifier or stereo system. Use the audio
cable supplied (6).

Connecting to other equipment

Use the top connector (EXT 2) on your DVD
SCART
recorder to make connections to a:
- Satellite receiver or Set top box,
- VCR,
- DVD Video player
Most pre-recorded video cassettes and DVD discs are
copy protected. If you try to copy them the display
shows 'COPY PROTECT'.
For installation of a decoder, see 'User Preferences' -
'Installation'.
TV
1 3
4
EXT 4 EXT 3
Set top box
Notes :
- If the power is off or Low Power Standby is selected (see
User Preferences - features), the signal from EXT 2 will not
be passed on to the TV set on EXT 1.
- EasyLink functionality will not be available to devices
connected via the DVD recorder's EXT 2
12 INSTALLATION
2
5
AUX- I/0
EXT 2
TO TV I/0
EXT 1
connector.
SCART
Connections - frontside of your
DVD recorder

Camcorder connection

l If you have a DV, Digital 8, Hi-8 or S-VHS(C)
camcorder, connect the S-video input socket to the
corresponding output socket on the camcorder,
using the S-video cable supplied (1) and connect the
audio cable (3) supplied.
l Otherwise connect the Video input socket (yellow)
to the corresponding output socket on the
camcorder using the video cable supplied (2) and
connect the audio Left (white) and Right (red) input
sockets to the corresponding sockets on the
camcorder using the audio cable supplied (3).
l If your camcorder has mono sound, use only the left
audio connector. In this case the sound will be
recorded on both audio channels.
S-VIDEO VIDEO AUDIO
L R
1
Camcorder
Camcorder
2 3