Operating Procedures - Panasonic AW-E300SP Operating Instructions Manual

Operating Procedures

1.
Turn on the power to the units concerned.
2.
Adjust the subject brightness to the appropriate level.
3.
Select the operating mode.
Once this mode is selected, it need not be changed so long as the camera is to be
used under the same conditions.
4.
Adjust the flange back of the lens, and adjust the iris and focus.
O This adjustment must be performed when using the camera for the first time or
when the lens has been changed.
5.
Adjust the white balance.
O This adjustment must be performed when using the camera for the first time or
when the camera has not been used for a prolonged period.
O It must be performed when the lighting conditions or brightness has changed.
O Once this adjustment has been performed, it need not be repeated so long as the
camera is to be used under the same conditions.
6.
Adjust the black balance.
O This adjustment must be performed when using the camera for the first time or
when the camera has not been used for a prolonged period.
O It must be performed when the ambient temperature has changed significantly or at
the turning of the seasons.
O Once this adjustment has been performed, it need not be repeated so long as the
camera is to be used under the same conditions.
7.
Start shooting.
Upon completion of shooting, turn off the power to the units concerned.
8.
To change the camera's settings to match other applications or conditions, refer
to page 27 and following.
The settings performed when the camera was shipped are appropriate for most
situations.
19