Integra DTR-5.6 Instruction Manual page 26

DTR-5.6.book Page 26 Thursday, September 22, 2005 5:07 PM
Connecting Your Components —Continued
Hooking Up the Multichannel DVD Input
If your DVD player supports multichannel audio formats such as DVD-Audio or SACD, and it has a multichannel
analog audio output, you can connect it to the AV receiver's multichannel DVD input.
Use a multichannel analog audio cable, or several normal audio cables, to connect the AV receiver's DVD IN FRONT
L/R, CENTER, SURROUND L/R, SURR BACK L/R, and SUBWOOFER jacks to the 7.1-channel analog audio output
on your DVD player. If your DVD player has a 5.1-channel analog audio output, don't connect anything to the AV
receiver's SURR BACK L/R jacks. See "Using the Multichannel DVD Input" on page 51 for setup and operation.
26
FRONT SURROUND CENTER
L
R
SUB
WOOFER
DVD
L R L R
FRONT SURROUND CENTER
WOOFER
DVD player
SURR BACK
L
R
L R
SUB SURR
BACK