Table of Contents
Advertisement
VIDEO SETTINGS
1
Press the SETUP button.
The setup screen will appear.
2
Press the
/
or numeric buttons to select
VIDEO, and then press the
ENTER button.
3
Press the
/
or numeric buttons to select an
item, and then press the ENTER button.
SETUP/VIDEO
• Full-height pictures are shown with one or both
TV MODE
sides trimmed.
1. 4:3 PAN&SCAN
• Wide screen (full-width) pictures are shown
2. 4:3 LETTER BOX
3. 16:9 WIDE
with black bars at top and bottom.
• If a wide screen TV is connected.
Enter,
Back
Exit
SETUP/VIDEO
STILL MODE
• AUTO is normally selected.
1. AUTO
2. FIELD
• If pictures are blurred in auto mode.
3. FRAME
• For showing motionless pictures at high
resolution in still mode.
Enter,
Back
Exit
4
Press the
/
or numeric buttons to select the
desired item, and then press the ENTER but-
ton.
5
Press the SETUP button.
The setup mode will be canceled and the ordinary
screen will appear.
Note
If the numeric buttons are used in steps 2 to 4, the
settings are immediately selected. (You do not need
to press the ENTER button.)
E7800-02
1
Press the SETUP button.
SETUP
1. LANGUAGE
The setup screen will appear.
2. VIDEO
3. AUDIO
4. LOCK
5. OTHERS
Enter
/
Exit
2
Press the
AUDIO, and then press the
ENTER button.
SETUP/VIDEO
1. TV MODE
[4:3LB]
2. STILL MODE
[AUTO]
Enter,
Back
Exit
3
Press the
item, and then press the ENTER button.
SETUP/AUDIO
DIGITAL OUT
1. PCM
2. DOLBY DIGITAL [OFF]
3. DTS
Enter,
Back
SETUP/AUDIO
VIRTUAL 3D
1. OFF
2. ON
Enter,
Back
4
Press the
desired item, and then press the ENTER button.
If PCM, DOLBY DIGITAL or DTS is selected on
the DIGITAL OUT setting screen, press the
numeric buttons again to select a further item, and
then press the ENTER button.
SETUP/AUDIO
PCM
1. 48kHz
2. 96kHz
Enter,
Back
SETUP/AUDIO
DOLBY DIGITAL
1. OFF
2. ON
Enter,
Back
SETUP/AUDIO
DTS
1. OFF
2. ON
Enter,
Back
- 22 -
AUDIO SETTINGS
/
or numeric buttons to select
1. DIGITAL OUT
2. VIRTUAL 3D
/
or numeric buttons to select an
• Sets the sample rate for playing a disc recorded
with high sound quality.
[48kHz]
• When a Dolby Digital decoder is connected.
[OFF]
• When a DTS decoder is connected.
Exit
• To activate the 3D effect.
Exit
/
or numeric buttons to select the
• Audio signals are converted to 48 kHz/16 bit
signals for digital output when playing a DVD
recorded with high sound quality (48 kHz/
20 bit/24 bit, 96 kHz).
• Sound is reproduced at the high quality of
96 kHz when playing a DVD recorded with high
sound quality (48 kHz/20 bit/24 bit, 96 kHz).
Exit
For 48 kHz discs or when 4:3 LETTER BOX
is selected in TV MODE, sound is reproduced
at 48 kHz.
• When a Dolby Digital decoder built-in amplifier
is used.
Exit
• When a DTS decoder built-in amplifier is used.
Exit
SETUP
1. LANGUAGE
2. VIDEO
3. AUDIO
4. LOCK
5. OTHERS
Enter
/
Exit
SETUP/AUDIO
[OFF]
Enter,
Back
Exit
/
or
EN
0D05
Advertisement
Table of Contents
