Connecting To An Amplifier Equipped With Digital Input Jacks, Md Deck Or Dat Deck - Sylvania DVL500A Owner's Manual

CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL
INPUT JACKS, MD DECK OR DAT DECK
Use audio coaxial digital cables (commercially available) for the audio connections.
A/V-compatible
or
wide screen TV
Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.
Notes
The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound
by an MD or DAT deck.
Be sure to turn off the power to all components in the system before connecting another component.
Refer to the Owner's Manuals for the components to be connected to the DVD player.
Set DOLBY DIGITAL and DTS to OFF for audio output in the setup mode. Playing a DVD using incorrect
settings may generate noise distortion, and may also damage the speakers.
When DOLBY DIGITAL is set to OFF and VIRTUAL 3D to ON for audio output in the setup mode and you
select the audio source in a 5.1 channel Dolby Digital surround format, the audio will be muted.
E7800-01
To VIDEO INPUT jack
or
To S-VIDEO
INPUT jack
To COAXIAL DIGITAL
AUDIO INPUT jack
- 11 -
To VIDEO OUT jack
To S-VIDEO OUT jack
DIGITAL AUDIO OUT
S-VIDEO OUT
PCM / BITSTREAM
COAXIAL
To COAXIAL DIGITAL
AUDIO OUT jack
VIDEO OUT AUDIO OUT
2
1
R L
[Fig. 4]
EN
0D05