Model No. Wx-101A-4 (380/460V, 3 Phase) - InSinkErator WASTEXPRESS 14481 User Manual

Waste Xpress 380/460V, 3Phase System Wiring Diagram
ELECTRICAL SHOCK
• Turn off the electrical supply to the disposer before
attempting any work on it. Use a voltmeter or
circuit tester to ensure that power is off.
• Installation must conform to local electrical codes.
• All components (disposer, WX, control center
and solenoids) must be carefully and permanently
grounded.
• A properly fused disconnect must be installed at
the electrical supply source for the control center.
120 V
380/460 V
1-phase
3-phase
1/2 to 2 HP
Call Toll Free 1-800-845-8345
for the nearest InSinkErator
Authorized Service Agency or
to reach Technical Support.
PROPERTY DAMAGE
• Ensure that the control center voltage and phase
match the disposer motor and electrical supply.
Check nameplates on disposers and control
centers for voltage and phase specifi cation.
• The disposer motor wiring connection is shown in
the disposer terminal box.
28